200 Troubleshooting
Clearing Paper Jams From the Center Output Tray
IMPORTANT:
• To prevent electric shock, always turn off the printer and disconnect the power cord from the grounded outlet
before performing maintenance.
• To avoid burns, do not clear paper jams immediately after printing. The fusing unit becomes extremely hot
during use.
• Protect the OPC drum against bright light. If the rear cover is left open for more than three minutes, print
quality may deteriorate.
NOTE:
• To resolve the error displayed on the LCD panel, you must clear all print media from the print media path.
1 Push the rear cover handle and open the rear cover.
2 Lift up the levers.
3 Remove the jammed paper from the rear of the printer. If no paper is found in the paper path,
then remove it from the center output tray.
To Next Page
Loading...
Need help?
General
