165
9.1 Installing/Removing Wireless LAN Kit
Removal
1. Press the <Power/Power Saver> button.
2. Tap on [Power Off Device] and turn off the power.
Make sure that the touch panel display and all the lights are turned off, then disconnect the power
cord from the power outlet and the machine.
3. Slide the latch on the rear left side in the direction of the arrow and lift it towards you.
4. Remove the left side cover by sliding it toward the back of the machine.
5. Unfasten the hook to remove the connector of the Wireless LAN Kit.
To Next Page
Loading...
Need help?
General
