21
2.2 Connecting to the Computer
When connecting a device that does not support Wi-Fi Direct such as an iOS terminal, set it to [Group
Owner].
Connecting Mobile Devices
Auto connection (Android OS)
1. Open the Wi-Fi settings screen on the mobile device and enable Wi-Fi.
2. Tap on [Wi-Fi Direct].
3. Select the machine from the list.
4. Confirm the name of the mobile device to connect at the screen displayed on the machine and
then tap on [Accept].
Manual connection (Android OS/iOS)
It is necessary to set [Group Owner] to [Group Settings] in [Wi-Fi Direct Settings].
1. Tap on > [Device Status] > [Wireless LAN Status].
[Group Owner] Set the machine as the Group Owner of the Wi-Fi network.
Setting it as the Group Owner will enable the machine to be
detected from a mobile device at the same time as the wireless
LAN access point.
[SSID Suffix] Displays the name of the network identified by Wi-Fi Direct.
Alphanumerics up to 23 characters can be entered for the section
that follows “DIRECT-”. The name set here will be displayed when
selecting the network to connect to from a mobile device.
[Passphrase] Enter at least 8 and up to 63 alphanumeric characters as the
passphrase. When connecting to the Wi-Fi Direct network from a
mobile device, enter the passphrase displayed here.
Setting items Details
To Next Page
Loading...
Need help?
General
