82
5 Device
5.4 [Audit Log Settings]
Sets settings for the audit log, and set settings relating to the Syslog. (The audit log is sent to other
client computers on the network using the Syslog protocol.)
The audit log records who did what work and when with the machine. If the audit log feature is used,
it is possible to monitor for improper use of the machine, or attempts at improper use.
Internet Services are used to retrieve the audit log.
For information on the items recorded in the audit log, refer to Audit Log Reference Guide provided at our
official website.
Item Description
[Record Audit Log] Sets whether to record the audit log.
An audit log is recorded in the machine if the audit log feature is
enabled.
Up to 15,000 logs are recorded in the log, and the logs with the older
date are deleted if 15,000 is exceeded.
[Send Audit Log to Syslog
Server]
Sets whether to send the audit log to the Syslog server.
[Syslog Server Name /
Address]
Input server name or IP address of Syslog server.
[Syslog UDP/TCP Port
Number]
Input the Syslog UDP or TCP port number.
[Syslog TLS Port Number] Input TLS port number of Syslog server.
[Syslog Transport Protocol] Sets transport protocol when sending to Syslog.
[Syslog Facility] Input facility number of audit log sent to Syslog.
[Syslog Timeout Value] Input sending timeout for sending to Syslog.
[When Send Error Occurs] Sets operation when audit log in machine reaches maximum number
of logs while sending to Syslog is not finished.
[Prioritize Device
Operation]
Overwrites logs, starting from the oldest dates. Syslog sending is
impossible for overwritten audit logs.
[Prioritize Audit Log] A system error occurs, and the machine stops. Reboot after setting
to the state where the machine and Syslog server can be connected
for restarting machine.
To Next Page
Loading...
Need help?
General
