45
3.10 Loading Paper
Removal
Remove the USB memory device before turning off power to the machine.
1. Tap on (removal).
2. Tap on [Confirm].
3. Remove the USB memory device.
3.10 Loading Paper
Paper Tray 1 to 4
The following describes the procedure for loading paper in Trays 1 to 4.
You can adjust the length of the trays to accommodate A4, A5, JIS B5, Letter (8.5 x 11"), Legal (8.5 x
14"), and 7.25 x 10.5" paper sizes. When you use the Legal-length paper setting, the paper tray
protrudes from the front of the machine.
With A5 LEF/A6 Tray Guide (optional), you can load paper with a vertical of 148.0 to 190.5 mm or less in
Tray 1.
1. Pull out the tray until it stops, and then lift the front of the tray slightly. Now you can remove the
tray from the main unit.
Do not pull out multiple trays at the same time. Otherwise, the machine gets inclined and
turns over, which may cause injuries.
To Next Page
Loading...
Need help?
General
