46
3 Basic Operations
2. Adjust the paper guides to the desired paper size.
For Legal-size paper, to extend the front of the tray, press the release latch, then pull the tray out.
3. Fan the paper well before loading. Align the four edges of the paper with a flat surface.
4. Load paper into the tray with the side to be printed on facing up.
Load the paper with the punched holes so that the holes are on the left side.
For printing on letterhead or pre-printed paper, load it with the top or left edge towards the back
of the tray. For printing on one side, load the paper facing up, and for printing on both sides, load
the paper facing down.
Do not load paper exceeding the maximum fill line. It might cause paper jams or device malfunctions.
B5
A4
10.5”
11”
A5
A4
7.25” 8.5”
B5
To Next Page
Loading...
Need help?
General
