Fujitsu ApeosPrint C4030 User Manual

27
2.5 Smart Card Registration
Note

When you use an Active Directory server, the authentication information saved on the Active Directory
server is copied and saved in the machine.
Under > [Device] > [Authentication/Accounting] > [Accounting] > [Authentication/Accounting
Settings], set [Off], or [Local]. When the authentication type is the remote account, accounting
setting is arbitrary.
Also, under > [Device] > [Authentication/Accounting] > [Authentication/Security Settings] >
[Authentication], set as follows.
Active Directory Server Settings
If you use the authentication information of the Active Directory Server, set the Active Directory
Server.
Set under > [Device] > [Network Settings] > [Remote Authentication Server Settings] on the
control panel.

[Attribute of Login User Name]: Used as the User ID.
Note

User Name cannot be set on the control panel or Internet Services. The "displayName" attribution of the
Active Directory server is acquired and set to the user information.
User Registration
If the user who has been registered with the machine uses this feature, register the user information
such as the user ID and password on the machine using the control panel or Device Setup.
Note

Notify users their ID and password, and that the authentication destination is "local".
System Administrator's Information Settings
Set the information of a system administrator with Smart Card Registration.
Note

If you change [System Administrator ID] or [System Administrator Password] on Setting Screen on the
machine, also change this service's settings. If not, this service may not run properly.
1. Log in to Administrator Mode with the control panel of the machine.
2. Tap on [Smart Card Registration].
Item Required Settings
[Authentication/Accounting Settings] [Local] or [Remote]
[User Details
Setup]
[Use of IC Card] [On]
[Account Auto
Setup for Card
Login]
[Enabled]
Note

Set this item when the login type is the local account.

[App Access] is set when you control the access of guest
users.
[IC Card Link
Mode]
[No Password Required]
Note

Set this item when the login type is the remote account.

Fujitsu ApeosPrint C4030 Specifications

General

Brand	Fujitsu
Model	ApeosPrint C4030
Category	Printer
Language	English