74
5 Device
The memory capacity of receive buffer (place for temporarily storing data sent from client) can be
changed for each interface to suit the use situation and purpose. If the receive buffer capacity is
increased, then the release of clients responding to each interface may become faster.
[Delete Form]
Individually deletes set forms. Input the form number for each print mode, and delete after checking
the displayed form name.
Item Description
[PostScript Memory] Specifies the memory capacity for PostScript.
[ART IV, ESC/P, 201H Form
Memory]
Sets the memory area for work when you use the ESC/P form.
When storage is installed, the storage is specified and cannot be
changed.
[HP-GL/2 Auto Layout
Memory]
Sets the memory area for work when you use the HP-GL/2 auto
layout feature.
When storage is installed, the storage is specified and cannot be
changed.
[Job Ticket Memory] Specifies the memory capacity to use for processing the job ticket
(which describes the output number of jobs or post-processing).
[Receiving Buffer - LPD] Sets whether to execute the spool process. Storage is used for the
receive buffer for the spool process.
When [No Spooling] is set, you cannot receive the data with the same
interface from other clients during processing the LPD printing.
Depending on the setting of [LPD Print Queue], [Receiving Buffer -
LPD] cannot be changed. Refer to "[Other Settings]" (P.77) for [LPD
Print Queue].
[Receiving Buffer - IPP] Sets whether to execute the spool process. Storage is used for the
receive buffer for the spool process.
When [No Spooling] is set, you cannot receive the data with the same
interface from other clients during processing the IPP printing.
To Next Page
Loading...
Need help?
General
