1
StEEP TIMER OPERATION
Unlike other
timer
functions; the
SLEEP
timer
is used
to
set the length
of
time
until air conditioner operation is stopped.
To
Use
the
SLEEP
Timer
While
the
air
conditioner
is operating
or
stopped,
I
To
Cancel
the
Tamer:
Use the TIMER button to select "TIMER
press
the
TIIVIER
button
(Fig. 6
®).
RESET".
The indoor unit's OPERATION Indicator Lamp (red) (Fig. 3 @) lights and
The air conditioner
will
return to normal
the TIMER Indicator Lamp (green) (Fig. 3
@) light.
operation.
To
Stop
the
Air
Conditioner During
Timer Operation:
(
To
Change
the
TIIVIER
Settings
Press the
START
I
STOP
button.
Press
the
TIIVIER
button
(Fig. 6
®)
once again and set
the
time
using
the
time
set
buttons
(Fig.
6@).
Set the time while the
time
display is flashing (the flashing
will
continue about five
seconds).
$ button: Press
to
advance the time.
e button: Press
to
reverse the time.
About
five seconds later, the entire display
will
reappear.
To
prevent excessive cooling
during
sleep, the
SLEEP
timer
function automatically modifies the thermostat setting in accon-
dance
with
the
time
setting. When the set
time
has elapsed, the air conditioner completely stops.
During Cooling/Drv operation:
When the
SLEEP
timer
is set, the thermostat setting is automatically raised 2
OF
every sixty minutes. When the thermostat has
been raised a total
of
4
OF,
the thermostat setting at that time is maintained until the set
time
has elapsed, at which
time
the air
conditioner automatically turns off.
SLEEP
timer
setting
En-9
To Next Page
Loading...
Need help?
General
