TX100 S3 Core Edition Upgrade and Maintenance Manual 175
Accessible drives
Ê Attach the fixation plate to the left side of the new backup drive.
Ê Install the new backup drive as described in section "Installing a backup
drive" on page 157.
12.4.5 Concluding steps
Perform the following procedures to complete the task:
Ê Close the side cover as described in section "Installing the side cover" on
page 56.
Ê Reconnect the power cord to the power supply unit and secure it with a cable
tie as described in section "Connecting the server to the mains" on page 57.
Ê Verify if your backup software solution requires additional configuration after
installing, removing or replacing an accessible drive as described in section
"Verifying and configuring the backup software solution" on page 69.
To Next Page
Loading...
Need help?
General