TX100 S3 Core Edition Upgrade and Maintenance Manual 191
Front panel and external connectors
13.2.8 Installing the front USB cable
Figure 126: Connecting the USB front cable
Ê Connect the front USB cable to the front USB module.
13.2.9 Concluding steps
Perform the following procedures to complete the task:
Ê Insert the HDD cage as described in "Installing the HDD cage" on page 62.
Ê Close the front cover as described in section "Installing the front cover" on
page 51.
Ê Close the side cover as described in section "Installing the side cover" on
page 56.
Ê Reconnect the AC power cord to the power supply unit and secure it with a
cable tie as described in section "Connecting the server to the mains" on
page 57.
To Next Page
Loading...
Need help?
General