Fujitsu PRIMERGY TX100 S3 Core Edition Upgrade And Maintenance Manual

TX100 S3 Core Edition Upgrade and Maintenance Manual 211
System board and components
Ê Reconnect the AC power cord to the power supply unit and secure it with a
cable tie as described in section "Connecting the server to the mains" on
page 57.
Ê If available, update the system board BIOS to the latest version as described
in section "Updating the system board BIOS via USB stick" on page 67.
14.2.2 Converting the system board to the Core Edition
version and storing the system’s serial number
An update image for USB sticks is available containing tools that perform two
different tasks at the same time:
– Writing the necessary "Headless" information to the system board (Pc_Ident)
– Writing the serial number to the system board (ChassisId_PromPc_Ident)
These two tasks always have to be performed after replacing the system board.
Proceed as follows:
Ê Download the USBImage tool from the support portal of the Fujitsu
Technology Solutions Extranet to a computer running Microsoft Windows
(download location does not apply to the Japanese market).
Ê Connect a USB stick to the computer.
Ê Start the downloaded USBImage tool.

Fujitsu PRIMERGY TX100 S3 Core Edition Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX100 S3 Core Edition
Category	Server
Language	English