Fujitsu PRIMERGY TX100 S3 Core Edition Upgrade And Maintenance Manual

TX100 S3 Core Edition Upgrade and Maintenance Manual 57
Basic hardware procedures
4.5 Connecting the server to the mains
The PRIMERGY TX100 S3 Core Edition server is equipped with a standard
power supply unit that automatically adjusts to any mains voltage in the range
of 100 VAC to 240 VAC.
V CAUTION!
The power supply automatically adjusts to any mains voltage in the
range of 100 VAC to 240 VAC. You may only operate the server if its
rated voltage range corresponds to the local mains voltage.
Ê Connect the power cord to the power supply unit.
Ê Connect the mains plug to a grounded mains outlet in the in-house power
supply network.
Securing the power cord
Figure 17: Securing the power cord
Ê Loop the cable past the cable tie mounting bracket as shown.
Ê Close the cable tie around the power cord (1) and pull tight (2) to secure the
power cord.
/
0

Fujitsu PRIMERGY TX100 S3 Core Edition Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX100 S3 Core Edition
Category	Server
Language	English