Fujitsu PRIMERGY TX100 S3 Core Edition Upgrade And Maintenance Manual

TX100 S3 Core Edition Upgrade and Maintenance Manual 195
System board and components
14.1.3 Replacing the defective CMOS battery
Figure 127: Replacing the CMOS battery
Ê Press the locking spring into direction of the arrow (1), so that the lithium
battery jumps out of its socket.
Ê Remove the battery (2).
V CAUTION!
Sharp tools such as screw drivers might damage system board
components in case of slipping.
If the battery cannot be ejected without the help of a tool, it is
recommended to use a tooth pick.
Ê Insert a new lithium battery of the same type into the socket (3) and (4).
1
2
3
4

Fujitsu PRIMERGY TX100 S3 Core Edition Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX100 S3 Core Edition
Category	Server
Language	English