10.2 Units
10.2.1
Time Format
This feature allows you to set how the time displays on the radio screen.
Step 1 Press the Menu/DSC control until the "MAIN MENU" screen appears.
Step 2 Go to "GENERAL SETUP > UNITS > TIME FORMAT".
Step 3 Select "12 HOUR" or "24 HOUR".
Step 4 Press the Menu/DSC control to save the setting and return to the previous
interface.
10.2.2 Time Offset
This feature allows you to set the time difference between UTC and local time if you
want to use local time. The offset is added to or subtracted from the time received
from the GNSS receiver or chart plotter.
Step 1 Press the Menu/DSC control until the "MAIN MENU" screen appears.
Step 2 Go to "GENERAL SETUP > UNITS > TIME OFFSET".
To Next Page
Loading...
Need help?
General
