4.3 System Setting: User Menu
4-14
4.3.2 AUTO ACK
Select AUTO or MANUAL by [SHIFT] -> [5:ACK] whether to respond (BQ: COMPLY
STATUS) to Ship call, Coast Call, Position Call and Polling Call can be set up. With
AUTO, BQ is transmitted automatically, and with MANUAL, BQ is transmitted
manually.
ＡＵＴＯ
ACK non-operation conditions
1. When MANUAL ACK is in use.
2. When Handset of Transceiver unit is in a state of OFF HOOK.
3. When Remote Handset is in a state of OFF HOOK.
4. When detecting ECC ERROR to RX RQ message.
5. When a category of RX RQ message is Safety, Urgency, and Distress.
6. As for Position Call, a setup made by [MENU] -> AUTO ACK -> POSITION
CALL is set to OFF.
7. As for Polling Call, a setup made by [MENU] -> AUTO ACK -> POLLING CALL
is set to OFF.
8. The communication channel is not specified.
9. When TCmd1 assigns Data and FAX.
10. In Russian Ver., when [MENU] -> AUTO CH is set to DISABLE.
1. COMPLY STATUS, UNABLE REASON
You can respond to incoming RQ message with either ABLE or UNABLE message as
your BQ message. The factory setting value is ABLE. When selecting UNABLE,
UNABLE REASON has to be set up.
Table 4.3.1 Operation of AUTO/MANUAL ACK
COMPLY STATUS: ABLE COMPLY STATUS: UNABLE
AUTO ACK Transmits “Able” automatically Transmits “Unable” automatically
MANUAL ACK Transmits “Able” manually Transmits “Unable” manually
- Ship Call
- Coast Call
- Position Call
- Polling Call
1. ACK Request
2. ACK BQ
(COMPLY STATUS)
AUTO ACK setting
- ATUO or MANUAL
- COMPLY STATUS:
ABLE/UNABLE
, receives call-up for all
ships, a channel in use by
[CANCEL] -> [ENT] is
automatically changed to CH16.
When you do not want to change
a channel in use, press
[CANCEL] key twice.
To Next Page
Loading...
Need help?
General
