Furuno HS-8800 User Manual

4.2 ID Setting
4-3
INTL
Hi
16
DSC NOT USABLE
LAT : 35 10’ N
LON : 135 11’ E AUTO
Rx
10 : 10 UTC
INTL
Hi
16
AUTO ACK WATCH CH 70
LAT : 35 10’ N
LON : 135 11’ E AUTO
Rx
10 : 10 UTC
4.2 ID Setting
4.2.1 SELF ID
When your own ID (MMSI) is not registered FM-8800S/D becomes the only operable
VHF function.
1. DSC communication is not available. Even if you press “CALL” key, “NO
MMSI” comes on, switch to DSC display can not be made, and editing DSC TX
message can not be done.
2. Even if you press [LOG] key, NO MMSI comes on, and DSC logs does not
open.
3. Distress Alert, All Ship Calls, Group Call and Area Call for the DSC cannot be
received.
4. Even if the position data are not inputted, alarm informing the input error of
position data does not go off.
NOTE)
In Russsian Ver., when turning on the power with the unregistered MMSI, “This unit CAN’T send
any DSC calls until ship’s MMSI is entered. Press any key!” pop-up menu is displayed.
INTL Ver. : Non-registered screen for MMSI
INTL Ver. : Registered screen for MMSI
INTL
Hi
Rx
AUTO ACK AUTO CH: ENA
LAT : 34 45.1111’ N
LON : 135 45.1111’ E
12:12
AUTOMMSI 432456789
16
UTC
INTL
Hi
Rx
DSC NOT USABLE
LAT : 34 45.1111’ N
LON : 135 45.1111’ E
12:12
AUTOMMSI ---------------
16
UTC
Russian Ver. : Non-registered screen for MMSI
Russian Ver. : Registered screen for MMSI

Furuno HS-8800 Specifications

General

Brand	Furuno
Model	HS-8800
Category	Cordless Telephone
Language	English