2. MENU
2-2
5. Press S or T key to select an option and press the ENT key. If the menu contains
more layers, repeat this step. When the value setting window shown below ap-
pears, press S or T key to set the value and press the ENT key. To return one
layer without saving settings, press the MENU/ESC key.
Example of value setting window
6. Press the DISP key to close the menu.
2.2 How to Customize the Data Screen
The RD-50 has three data screen types; [Graphic], [Digital] and [Graph]. You can se-
lect what data to display and the order to display it. Availability of data depends on the
sensors connected.
1. Press the MENU/ESC key to open the menu.
2. Press S or T key to select [Display] and press the ENT key.
Display menu
Scroll bar
(Indicates additional
menu items. You can
scroll the menu items
by using
or key.)
To Next Page
Loading...
Need help?
General
