2. MENU
2-27
2.15 Trip Distance
You can select the distance data for the trip distance, from [Internal] or [External]. Al-
so, you can set the preset distance to display the trip distance.
1. Press the MENU/ESC key to open the menu.
2. Press S or T key to select [Trip DIST] and press the ENT key.
Trip DIST options
3. Press S or T key to select [Internal] or [External] then press the ENT key. If you
selected [Internal], go to step 4. For [External], go to step 6.
[Internal]: Display the trip distance which is counted up based on the inner setting
of this equipment. See steps 4 and 5 for how to preset distance.
[External]: Display the trip distance using data from external equipment.
4. For [Internal], press S or T key to select [SET] and press the ENT key.
Internal options SET setting window
5. Set the preset distance. Press S or T key to set the value for the highest-order
digit and press the ENT key. The cursor moves to the next digit. Repeat this step
to set the value for ALL digits. To return the cursor to the upper digit, press the
MENU/ESC key.
Note: Be sure to enter ALL digits. Otherwise the setting is not saved.
To reset the trip distance, select [RESET] and press the ENT key.
6. Press the DISP key to close the menu.
To Next Page
Loading...
Need help?
General
