2. MENU
2-16
7. Press S or T key to select [Position] and press the ENT key.
Position options
8. Press S or T key to select [Single], [Port] or [Starboard] then press the ENT key.
[Single]: One rudder on the ship
[Port]: Display the data for port rudder
[Starboard]: Display the data for starboard rudder
9. Press the DISP key to close the menu.
2.7.2 Rudder order symbol
You can turn on/off the rudder order indication.
1. Press the MENU/ESC key to open the menu.
2. Press S or T key to select [Scale Set Up] and press the ENT key.
3. Press S or T key to select [Rudder Order Symbol] and press the ENT key.
Rudder Order Symbol options
4. Press S or T key to select [ON] or [OFF] then press the ENT key.
5. Press the DISP key to close the menu.
To Next Page
Loading...
Need help?
General
