Furuno RD-50 User Manual

FURUNO RD-50
SP - 1 E4453S01C
SPECIFICATIONS OF REMOTE DISPLAY
RD-50
1 REMOTE DISPLAY
1.1 Display type 8.4-inch color LCD, 640x480 dots
1.2 Picture color 256 colors
1.3 Data indication Ship’s speed, Course, Heading, Trip, Depth, Rate of turn,
Wind direction/speed, Rudder angle, Engine/shaft RPM,
Propeller pitch, Water temperature, Waypoint, Ship’s position,
Date/time
1.4 Remote control Remote controller (option) required
1.5 Remote dimmer Dimmer controller (option) required
1.6 Interface
Remote control Serial 1 port, 38,400 bps,
5 VDC output (for remote/dimmer controller)
Sensor NMEA0183 Ver1.5/2.0/3.0, Input: 1 port
Daisy chain (for RD-50) Output: 1 port, 38,400bps
1.7 Data sentences BWC, BWR, DBK, DBS, DBT, DPT, GLL, GNS, HDG, HDT, HDM,
HTC, HTD, MTW, MWV, RMB, RMC, ROT, RPM, RSA, VBW, VHW,
VLW, VTG, VWR, VWT, WPL, ZDA
2 REMOTE CONTROLLER (OPTION)
2.1 Control button DISP, UNIT, MODE
2.2 Interface Serial, Input: 1 port, Output: 1 port, 38,400bps
5 VDC input (supplied from remote controller)
5 VDC output (for dimmer controller)
3 DIMMER CONTROLLER (OPTION)
3.1 Control button DAY/NT, BRILL (▲/▼)
3.2 Interface Serial, Output: 1 port, 38,400bps
5 VDC input (supplied from remote display or remote controller)
4 POWER SUPPLY
12-24 VDC: 1.0-0.5 A
5 ENVIRONMENTAL CONDITION
5.1 Ambient temperature
Remote display -25°C to +55°C
Remote/Dimmer controller -15°C to +55°C
5.2 Relative humidity 95% at 40°C
5.3 Degree of protection IP22, IP56 (optional waterproof box required)
5.4 Vibration IEC 60945
6 UNIT COLOR
N2.5

Furuno RD-50 Specifications

General

Brand	Furuno
Model	RD-50
Category	Monitor
Language	English