Garmin G1000 Pilot’s Guide for the Socata TBM 850
190-00709-00 Rev. A 8-45
ADDITIONAL FEATURES
FLITECHARTS CYCLE NUMBER AND EXPIRATION DATE
FliteCharts data is revised every 28 days. Charts are still viewable during a period that extends from the
cycle expiration date to the disables date. FliteCharts is disabled 180 days after the expiration date and are
no longer available for viewing upon reaching the disables date. When turning on the G1000, the Power-up
Page indicates any of five different possible criteria for chart availability. These indications are whether the
databases are not configured, not available, current, out of date, or disabled. See the table below for the various
FliteCharts Power-up Page displays and the definition of each.
Power-up Page Display Definition
Blank Line. G1000 system is not configured for FliteCharts. Contact
a Garmin-authorized service center for configuration.
System is configured for FliteCharts but no chart database is
installed. Refer to Updating Garmin Databases in Appendix B for the
FliteCharts database
Normal operation. FliteCharts database is valid and within current
cycle.
FliteCharts database is beyond the expiration date, but still within
the 180 day viewing period.
FliteCharts database has timed out. Database is beyond 180 days
after expiration date. FliteCharts database is no longer available for
viewing.
Table 8-2 FliteCharts Power-up Page Annunciations and Definitions
To Next Page
Loading...
Need help?
General
