Garmin G1000 Pilot’s Guide for the Socata TBM 850
190-00709-00 Rev. AB-2
APPENDIX B
4) After the update completes, the PFD starts in normal mode.
5) Turn the G1000 System OFF and remove the SD card.
6) Repeat steps 1 through 4 for the other PFD and the MFD. The MFD and PFD databases are now updated.
Remove the SD card when finished.
7) Verify that the correct update cycle is loaded during startup of the MFD.
GARMIN DATABASES
The following G1000 databases are stored on Supplemental Data Cards provided by Garmin:
• Expanded basemap
• Terrain
• Airport terrain
• Obstacle
• SafeTaxi
• FliteCharts
After subscribing to the desired database product, these database products will be downloaded to three
Supplemental Data Cards (with the exception of FliteCharts, which is loaded on only one card). Insert each
Supplemental Data Card into the correct location shown in Figure B-3. These cards must not be removed
except to update the databases stored on each card.
Figure B-3 Correct Database Locations
MFD
PFD1
PFD2
Since these databases are not stored internally in the MFD or PFD, a Supplemental Data Card containing
identical database versions must be kept in each display unit.
The basemap database contains data for the topography and land features, such as rivers, lakes, and towns.
It is updated only periodically, with no set schedule. There is no expiration date.
The terrain and airport terrain databases contain the terrain mapping and airport diagram data. They are
updated periodically and have no expiration date.
To Next Page
Loading...
Need help?
General
