viiiGTN 650: TUNING COM AND NAV FREQUENCIES
You can use the Find button to quickly look up and load a com frequency. e GTN stores recently used
frequencies in a handy list, and you can also select frequencies from lists that display com frequencies at the
nearest airports, airports in the current ight plan, and frequencies that you have stored in a User list.
Find a com frequency
1. TOUCH the COM STBY window.
2. On the COM STBY keypad, TOUCH Find. e
Find Recent COM Frequencies window appears.
a. For a recently used frequency, TOUCH Recent.
TOUCH the Up and Down arrows to scroll
through the list.
b. For a frequency at a nearby airport, TOUCH
Nearest. If the airport has several com
frequencies, touch Multiple FREQ to se-
lect one from a list (ATIS, Tower, Ground,
etc.).
c. For a com frequency for an airport or
facility in the active ight plan, TOUCH
Flight Plan.
d. For a frequency stored in the User list,
TOUCH User.
3. To load any frequency from any list into the
com STBY window, TOUCH the frequency.
Add a frequency to the User list
You can save up to 15 User frequencies.
1. TOUCH the COM STBY window.
2. On the COM STBY keypad, TOUCH Find. e Find Re-
cent COM Frequencies window appears.
3. TOUCH User.
4. In the User COM Frequencies window, TOUCH
Add User Frequency.
5. TOUCH Name on the User Frequency Name key-
pad, enter a name for the frequency you want to
save and then TOUCH Enter.
6. On the Add User Frequency window, TOUCH
Frequency.
7. On the User Frequency keypad, enter the frequen-
cy digits and then TOUCH Enter.
To Next Page
Loading...
Need help?
General
