32GTN 650: OTHER FEATURES AND CUSTOMIZATION
Check the status of external devices connected to the GTN
1. PRESS the
HOME
button in the upper-right corner of the be-
zel.
2. On the Home page, TOUCH System.
3. On the System page, TOUCH External LRUs.
Configure the CDI scale, date/time format, keyboard type, and other settings
1. PRESS the
HOME
button in the upper-right corner of the bezel.
2. On the Home page, TOUCH System.
3. On the System page, TOUCH Setup
a. CDI: TOUCH CDI Scale (normally Auto) and
TOUCH 0.30 NM, 1.00 NM, 2.00 NM, or Auto.
b. CDI: TOUCH ILS CDI Capture. TOUCH to
toggle between Auto Switch and Manual Se-
lection. (is setting is not available with all
external PFDs and autopilots. Check with an
avionics technician before changing the default
setting for your installation.)
c. Date/Time: TOUCH Time Format to select Local 12 hour, Local 24 hour, or UTC (no oset).
d. Nearest Airport: TOUCH to specify the criteria used to display nearest airports. You can specify the
runway surface (Any, Hard Only, Hard/So, and Water); a minimum runway length between 0 and
25,000 feet.
e. Com/Nav: TOUCH COM Channel Spacing. TOUCH to toggle between 8.33 kHz (used in Europe)
and 25.0 kHz.
f. Com/Nav: TOUCH Reverse Frequency Lookup. Select On or O. e identier and frequency type
are shown for the nearest stations in the database. Identiers with a “+” sign have multiple stations
associated with a frequency.
g. Keyboard: TOUCH to toggle between the QWERTY and ABC keyboard.
h. Crossll: TOUCH to toggle between On or O (if dual GTN units are installed).
Configure airspace and waypoint arrival alerts
1. PRESS the
HOME
button in the upper-right corner
of the bezel.
2. On the Home page, TOUCH System.
3. On the System page, TOUCH Alerts.
4. In the System-Alerts window, TOUCH Airspace
Alerts:
a. TOUCH the labels for types of airspace for
which you want to receive alerts.
b. TOUCH Altitude Buer to change the altitude buer for airspace alerts.
c. TOUCH Back to return to the System–Alerts window.
5. In the System-Alerts window:
a. TOUCH Arrival to toggle the arrival alerts on or o.
b. TOUCH Proximity to set the distance from the waypoint that triggers the alert.
TIP
To clean the screen, use either a micro-
fiber cloth or a soft cotton cloth damp-
ened with clean water. DO NOT use
any chemical cleaning agents.
To Next Page
Loading...
Need help?
General
