3GTN 650: DIRECT-TO NAVIGATION
the search results
to nd the way-
point and touch it
to select it.
Navigate direct-to a map waypoint
1. On the Map page:
a. TOUCH the symbol for an airport, VOR, intersection,
or other labeled waypoint, or
b. TOUCH any place on the map where you want to create a map waypoint (MAPWPT).
2. PRESS the button on the bezel.
e Direct-To window appears, with the Waypoint tab ac-
tive. If you touched a labeled waypoint, its name appears in
the Waypoint name control. If you touched a place on the
map not associated with a labeled waypoint, the name MAP-
WPT and the latitude/longitude coordinates appear in the
Waypoint name control. To give the map waypoint a unique
name, TOUCH MAPWPT and then enter a new name.
3. Review the waypoint name and details. If you made a mis-
take,
a. TOUCH the waypoint name again and re-enter the
waypoint name, or
b. TOUCH Cancel.
4. TOUCH the Activate button in the lower-right of the dis-
play (or PRESS the Small knob).
e Map page appears with a magenta line drawn from your
present position to the waypoint you chose.
Navigate direct-to a waypoint on a specific course
You can use the Course To control in the Direct-To window to
specify a course to y to a waypoint, for example, when cleared
to intercept and track a specic VOR radial.
1. PRESS the button on the bezel. e Direct-To window
appears with the Waypoint tab active.
2. TOUCH the Waypoint, FPL, or NRST APT tab.
3. TOUCH the waypoint that you want navigation toward.
4. Review and conrm the waypoint information.
5. TOUCH the Course To button.
6. In Course To, TOUCH the numerals in sequence to enter
the course you want to y. You can also use the Large and
Small knobs to move the cursor and enter a course.
7. TOUCH Enter.
8. TOUCH the Activate button in the low-
er-right of the display (or PRESS the Small
knob).
e Map page appears with a magenta line
drawn along the specied course to the waypoint
you chose.
TIP
To track inbound on a specific radial to a VOR, enter the
reciprocal of the radial. For example, to fly inbound on
the 090 radial, enter 270 in the Course To window.
To Next Page
Loading...
Need help?
General
