Garmin GTN-650 User Manual

28GTN 650: OTHER FEATURES AND CUSTOMIZATION
e Waypoint Info page can display information about any waypoint in the navigation database.
Find waypoint information
1. To display the Waypoint Info page, PRESS the
HOME
button in the upper-right corner of the bezel.
2. On the Home page, TOUCH Waypoint.
3. On the Waypoint Info page, TOUCH the icon for the type of waypoint you’re interested in.
a. TOUCH Airport, for the Airport window. TOUCH the tab corresponding to the type of information
you want see.
b. TOUCH Intersection, VOR, or NDB, or User Waypoint, to view information about that type of
waypoint.
c. To nd information about any waypoint of that type, in the Waypoint Info window, TOUCH the
name of the displayed waypoint.
d. In the Waypoint Identier window, use the keypad or TOUCH Find to enter the name of a new way-
point and TOUCH Enter.
4. To create a new user waypoint, TOUCH Create Waypoint. For more information about creating user
waypoints, see “Using User Waypoints” earlier in this manual.
Use optional services
You can connect a GTN to many optional services, such as a telephone and satellite music channels. e choic-
es available on the Services page depend on the equipment and services that are connected to your GTN. For
more information about these features, see “13 Services/Music” in the GTN 625/635/650 Pilot’s Guide.
Using the GTN Utilities
e GTN includes a variety of utilities to help you plan trips, es-
timate fuel burn, perform E6B calculations, check RAIM, set up
ight timers and messages, and record electronic logs onto SD
cards. You can also use the Clean Screen utility to temporarily
turn o the touch screen so that you can clean it.
View the Utilities page
1. PRESS the
HOME
button in the upper right corner of the
bezel.
2. On the Home page, TOUCH Utilities.
VNAV and VCALC Options
If your GTN has system soware 6.5 or later, you can view in-
formation about the current VNAV Prole and constraints. See
“Using Vertical Navigation (VNAV) and Along-Track Osets”
earlier in this manual.
If your GTN is using system soware
prior to 6.5, or if you chose to retain the leg-
acy VCALC (vertical calculator), VCALC
appears on the Utilities page.
When ying an active ight plan or
proceeding direct-to a waypoint, VCALC
computes the required vertical speed and
displays the time when you should start a
descent to reach a specied altitude at or

Garmin GTN-650 Specifications

General

Display Type	LCD
Voltage Range	10-32 V DC
WAAS enabled	Yes
Operating Temperature	-20°C to +55°C
Interface	Touchscreen
Database	Jeppesen
Connectivity	RS-232
Audio	Audio panel integration