Garmin GTR 200 User Manual

GTR 200 Installation Manual 190-01553-00
Page vi Rev. B
PARAGRAPH PAGE
Appendix A Shield Block Connector Installation Instructions .....................A-1
A.1 Shield Block Installation Parts....................................................................................... A-1
A.2 Shield Termination Technique – Method A.1 (Standard) ............................................. A-3
A.3 Shield Termination Technique - Method A.2 (Daisy Chain) ........................................ A-7
A.4 Shield Termination – Method B.1 (Quick Term) .......................................................... A-7
A.5 Shield Termination-Method B.2 (Daisy Chain-Quick Term)........................................ A-9
A.6 Daisy Chain between Methods A and B ...................................................................... A-10
A.7 Splicing Signal Wires .................................................................................................. A-10
Appendix B Serial Interface Specifications.....................................................B-1
B.1 Electrical Interface ..........................................................................................................B-1
B.2 Message Formats.............................................................................................................B-1
Appendix C Outline and Installation Drawings .............................................C-1
Appendix D Interconnect Examples ................................................................D-1

Garmin GTR 200 Specifications

General

Modulation	AM
Operating Temperature	-20°C to +55°C
Channel Spacing	8.33 kHz / 25 kHz
Transmit Power	10 W
Operating Voltage	14/28 VDC systems
Frequency Range	118.000 - 136.975 MHz