16
4. Press the OK soft key to save your selection, and return to the main
menu. The new ringer tone is displayed for two seconds.
HANDSET DISPLAY BASE DISPLAY
TONE/PULSE
Most telephone systems use tone dialing, however, some may still use
pulse dialing. Depending on your telephone system, set the dialing mode
as follows:
This setting may be made with the base only. Make sure the base is at the
main menu. Make sure your phone is OFF (not in TALK mode).
1. Press the CID/messages ( or ) button on the base to scroll to
TONE/PULSE
.
2. Press the OK soft key and
SET TONE/PULSE 1TONE 2PULSE
shows in
the display.
3. Use the touch tone pad on the base to select
1TONE
or
2PULSE
, or press
the CID/messages ( or ) button to scroll to your selection. The default
setting is
1
.
RINGER TONE
OK
REGISTRATION
EXIT
RINGER TONE
OK
AREA CODE
EXIT
TONE / PULSE
OK
TIME
EXIT
SET TONE / PULSE
OK
1 TONE 2 PULSE
EXIT
RINGER TONE - 2
To Next Page
Loading...
Need help?
General
