48
NAME
EXIT
SAVE
12 34567890 1 2 34 5
01
CALL
#
DEL
9:58
AM
11/24
NEW
DELETE ALL ?
EXIT
OK
NO CALLS
2. Use the cid/vol ( or ) button on the handset or CID/messages ( or )
button on the base to display any Caller ID record.
3. Press and hold the DEL soft key for two seconds. The display shows
DELETE ALL?
4. Press the OK soft key to erase all CID records from memory. The display
shows
NO CALLS
. You will hear a confirmation tone.
NOTE: Press the EXIT soft key once to return to the CID review menu. Or,
press and hold the EXIT soft key to return to standby mode.
CALLER ID ERRORS
If there is an error in the transmission of information to your phone,
ERROR
or
INCOMPLETE DATA
shows in the display. If you are not
subscribed to Caller ID (CID) service, or it is not working properly,
NO
DATA
shows in the display.
ANSWERING SYSTEM SET UP
This section shows you how to set up your answering machine to receive
incoming calls. Answering system setup may only be done at the base.
To Next Page
Loading...
Need help?
General
