To Next Page

To Previous Page

HANDSET 1

DIR

NAME

ANS

local area code into memory, you may need to adjust the format of the

incoming caller ’s stored phone number before dialing it back. The

format button lets you change the format of the displayed number.

Available formats include:

Number of digits Explanation Example

Eleven digits long distance code “1 ” 1-317-888-8888

+3- digit area code +7-digit

telephone number.

Ten digits 3-digit area code +7-digit 317-888-8888

telephone number.

Seven digits 7-digit telephone number. 888-8888

NOTE: If the incoming number is a Direct Dial Number, it is supplied by your

local phone company, and you may not adjust its format. When you press the

format/conference button on handset or the format/conf. button on the base,

PRESS TALK KEY displays. Press the talk/callback button on handset or the

speaker/callback button on base to dial the number.

3. If the number does not dial as shown, press the format/conference

button on handset or format/conf on the base. Repeat if necessary, until

the correct number of digits show in the display.

4. Press the talk/callback button on the handset or speaker/callback on the

base. The number dials automatically.

NOTE: If the number is corrupted, such as a number in a name or an

alphabetical character in a number, an error tone sounds from the handset or

base and the number cannot be dialed.

DELETING THE CALLER ID RECORD SHOWING IN THE DISPLAY

1. Make sure the phone is OFF (not in talk mode).

GE 21091 User Manual

Questions and Answers: