39
and press the 1 key to insert a space between the first and last name.
Press the 7 key 4 times for the letter S; press the 6 key once for the letter
M; press the 4 key 3 times for the letter I; press the 8 key for the letter T;
press the 4 key twice for the letter H.
6. Press the OK soft key to confirm your selection. The display shows
ENTER TEL NUMBR
.
7. Use the touch-tone pad on your handset or base to enter the area
code followed by the telephone number (up to 24 digits, including
pauses) and press the OK soft key again to save your selection. The
unit beeps to confirm.
8. To enter another name and number in a different memory location,
please follow step 1 and repeat the process.
STORING A REDIAL NUMBER
1. Make sure the phone is OFF (not in TALK mode).
2. Press the DIR soft key.
3. Press any number key (01-50) to store the phone number in that
memory location, or press the cid/vol ( or ) button on the handset or
CID/messages ( or ) button on the base to select the memory
location.
4. Press the EDIT soft key and
ENTER NAME
shows in the display.
5. Use the touch-tone pad on your handset or base to enter the name, then
press the OK soft key and
ENTER TEL NUMBR
shows in the display.
ENTER TEL NUMBR
EXIT
0 3
MEMO
#
OK DEL
HANDSET 1
DIR
MENU
NAME
ANS
To Next Page
Loading...
Need help?
General
