57
REMOTE ACCESS
This section explains how to use the cordless handset, or any touch tone
phone, to access the answering system with your 3-digit security code.
TIPS: If you access the answering system with any other touch-tone phone, a
voice menu guides you through the steps.
ACCESSING THE ANSWERING SYSTEM WITH THE CORDLESS HANDSET
1. Make sure your handset is in standby mode.
2. Press the ANS soft key to access the answering system. The display
shows
ANSWERER REMOTE ACCESS
.
3. Press the PLAY soft key to play messages, press the ANS soft key to
setup, or press EXIT to return to standby mode.
4. When you are finished reviewing your messages, press the STOP soft
key to stop message playback, and then press the EXIT soft key to exit
the
ANSWERER REMOTE ACCESS
mode.
SCREENING CALLS WITH THE CORDLESS HANDSET
You may use the cordless handset to remotely screen calls.
1. Make sure the phone stops ringing and the answering system answers
the call.
2. Press the ANS soft key to access the answering system.
3. Listen as the caller leaves a message.
4. Press the TALK/callback button to speak to the caller, or press the ANS
soft key again to stop screening the call.
MEMO
RECORDING
To Next Page
Loading...
Need help?
General
