63
HANDSET SOUND SIGNALS
Signal Meaning
A long warbling tone (with ringer on) Signals an incoming call
Three short beeps Page signal
One short beep (every 7 seconds) Low battery warning
TROUBLESHOOTING GUIDE
TELEPHONE SOLUTIONS
No dial tone
• Check or repeat installation steps.
• Make sure base power cord is connected to a working electrical outlet.
Make sure the telephone line cord is connected to the base and the
modular phone jack.
• Connect another phone to the same jack; if there is still no dial tone, the
problem might be your wiring or local service.
• The cordless handset may be out of range of the base. Move closer to
the base.
• Make sure the battery is properly charged (12 hours).
• Make sure the battery pack is installed correctly.
• Did the handset beep when you pressed the talk/callback button? Did
the charge indicator on the base turn on? The battery may need to be
charged.
• Place handset in cradle for at least 20 seconds to reset.
To Next Page
Loading...
Need help?
General
