GE HealthCare CONFIDENTIAL
Direction 5936427, Rev. 1 LOGIQ Totus Basic Service Manual
Chapter 3 LOGIQ Totus Setup 3 - 61
3-7-5-5 Services for special devices
For Tricefy and Koios, set up the service(s) that the device supports (you must be an administrator to
update these screens).
NOTE: Before configuring a Dicom service for Tricefy and KOIOS, configure them in Special Devices.
Use Add Dicom Service to set the properties for the service. The name and properties in this section
change, depending on what service is currently selected.
For the special devices, these are the related devices and services:
• Koios device with Koios_Assessment and Koios_SR services
• Tricefy device with Tricefy_QR, Tricefy_Store and Tricefy_PatientShare services
NOTE: For Device Mgmt, Insite, Syslog, Data Streaming and Vscan Air, there are no Dicom devices or
services.
Perform this procedure to configure services for a special Dicom device.
Table 3-26 To Configure Services for a Special Device
Step Corresponding Graphic
1.
Navigate to Connectivity > Connection Manager > Dicom.
2.
Select the special device.
This is an example of the Koios device.
3.
Select Edit for the service.
This is an example of the Koios services.
To Next Page
Loading...
Need help?
General
