Revision History
5495975-1EN Rev.9 i-v
© 2013-2017 General Electric Company. All rights reserved.
8 23 Jan 2017 To add Standard Table & Manual Wallstand and upgraded Collimator, detailed
revise happened together with having corrected legend errors as below.
1. In chapter 2: Revised Table 2-5 Maximum Attenuation Equivalent mm AL with
adding new items and correcting legend errors under section General Use Warn-
ings; Revised Table 2-14 Identification Plate with adding new items and correcting
legend errors under section Identification Plate and Compliance Plates Location;
Added
a new section Standard Table Warning Labels under section NRTL Listed
Label; Added a warning for standard table load capability under section Patient
Positioning Warnings;
2. In chapter 4: Revised Figure 4-8 Emergency Stop buttons and corrected a Cau-
tion under section Emergency Stop.
3. In chapter 5: Corrected a Caution under section Emergency Stop button.
4. In chapter 7: Added “Do not stand on the grid” under section Grid Handling.
5. In chapter 8: Revised the configurations and the note in section Configurations;
Revised Table 8-1 Major system components with adding new components under
section Component Identification; Revised Table 8-2 Available Options with adding
new options under section Available Accessories; Revised multi-leaf collimator
description and Figure 8-13 Collimator controls under section Multi-Leaf Collimator;
Revised Figure 8-14 Multi-leaf collimator display under section Collimator Display; In
section Digital Wallstand, added word “digital” in several places in order to differen-
tiate Digital Wallstand with new Manual Wallstand; added Wallstand chin rest as
applied part. Added a new section Manual Wallstand after section Digital Wall-
stand; In section Digital Table, added word “digital” in several places in order to dif-
ferentiate Digital Table with new Standard Table; revised a Caution of item 7 in table
8-13, too. Added a new section Standard Table after Digital Table section; Revised
section Digital Cassette Imaging in Extended Table Detector Tray with clinical input;
Added a new section Standard Table Hand Grips and Compression Band after sec-
tion Digital Table Hand Grips and Compression Band; Corrected an error on Lateral
Bridge Lengths by deleting 4.5 meter bridge (option).
6. In chapter 10: Added a Caution for labeling mitigation following up; Added a note
in section Conduct a Wallstand Exam. Added a note in section Conduct a Table Top
Exam and section Conduct a Cassette Exam.
7. In chapter 13: deleted “(not available in USA)” at the title “Dual Energy”.
8. In chapter 14: corrected the wrong service documentation part numbers under
section General and Periodic Maintenance Schedule.
9. In chapter 15: corrected an error in the first paragraph under section Add or Edit
DICOM Printers; Added a caution into section Retrieve Protocol Database from CD or
DVD.
10. In Appendix B: added specifications for new Standard Table and Manual Wall-
stand. Meanwhile corrected some legend errors on OTS, tables, Wallstand and stor-
age conditions.
What is more, Labeling category was cleaned up throughout this manual. Copyright
time was revised through this manual, too.
Revision History
Revision Date Description of Change
To Next Page
Loading...
Need help?
General
