Chapter 4: General Information
5495975-1EN Rev.9 4-5
© 2013-2017 General Electric Company. All rights reserved.
Invalid Password Message
Your Password must be entered correctly for you to log in. If the password you entered is not the correct
password for the selected User name, an error message will appear in the top portion of the Login
screen: “Logon Failed. Check that the CAPS LOCK Key is off. For assistance, contact your system adminis-
trator.“
1. Make sure that the correct Login Name is displayed in the field. Depending on the configuration, the
Login Name may be case sensitive. That is, “aBc” is not the same Login Name as “Abc.”
2. Retype your Password carefully. Your password is case sensitive; that is, “xYz” is not the same pass-
word as “Xyz.”
3. Click [LOGIN].
Contact your technical support group or system administrator if you still are not able to login.
Emergency Login
Emergency Login is a HIPAA required function to allow quick access to medical systems in the event of an
emergency. Depending on the system’s configuration, this option may not be available. Refer to
Appendix A: Login Administration
to configure the Emergency Login function.
Emergency Login will allow exposures, but does not allow connection to HIS/RIS or PACS hosts.
CAUTION The Emergency Login function should NOT be used when there is time to login nor-
mally, when there is time to receive assistance from technical support, or if there
is no emergency situation.
1. Click [EMERGENCY LOGIN].
You are prompted to enter your name. Enter your name and click [LOGIN]
2. The Worklist screen appears. Refer to Chapter 9: Worklist
for more information.
To Next Page
Loading...
Need help?
General
