GE XDP-H2 User Manual

January 2008
5-18 Advanced Programming
Loading Software To download a new software program into the XDP, access the User
Program as described on page 3-4 and proceed as follows:
IMPORTANT: The download takes place via the XDP’s serial port.
Before proceeding, make sure that the serial port is
properly connected and configured. Also, the new
software file must be available on the connected PC.
Note: “Lock All” and “Versions” menu options also appear on the
above list.
XDP Software
Cfg Cal
Opt
Disp Use the [W] and [X] keys to
select [Opt] and press
[ENTER].
Cfg Cal
Opt
Disp Use the [S] and [T] keys to
select
[Setup]. Then, press
[ENTER]. and proceed to the
appropriate section.
User
Setup
Lock Menus
Setup Use the [S] and [T] keys to
select
[Load Slot] and press
[ENTER].
Load Slot
Load Main
Setup Load-Slot Press [ENTER].
1:Load
ID:
When the download is com-
plete, the meter automatically
reboots into run mode.
Size:
Received Block:
Write to Slot 1

GE XDP-H2 Specifications

General

Brand	GE
Model	XDP-H2
Category	Measuring Instruments
Language	English