Advanced Programming 5-19
January 2008
System Software
Exiting the User Program When you have finished programming all of the required functions,
press
[ESC] as many times as necessary to return to normal run mode.
The number of key presses required depends on which feature was
programmed last. The XDP may then be placed into service.
Setup Use the [
S] and [T] keys to
select
[Load Main] and press
[ENTER].
Load Slot
Load Main
BSeries Loader v1.03
To respond to the question,
press
[ESC] for “Y” or press
[ENTER] for “N”.
Boot is Flash.
Load by Software.
Load:via Comm(Y/N)?
ID:
When the download is com-
plete, the meter automatically
reboots into run mode.
Size:
Received Block:
Write to Flash
To Next Page
Loading...
Need help?
General
