Hantek DSO2000 Series Programmer's Manual

SCPI Programmers Manual
16
⚫ TRIGger:PULSe
⚫ TRIGger:SLOPe
⚫ TRIGger:TV
⚫ TRIGger:TIMeout
⚫ TRIGger:WINDOw
⚫ TRIGger:INTERVAl
⚫ TRIGger:UNDER_Am
⚫ TRIGger:UART
⚫ TRIGger:CAN
⚫ TRIGger:LIN
⚫ TRIGger:IIC
⚫ TRIGger:SPI
⚫ TRIGger:PATTern
4.1 TRIGger:FORCe
4.2 TRIGger:MODE
4.3 TRIGger:STATus?
Command
:TRIGger:FORCe
Description
Select or query the force trigger.
State
Even if the trigger conditions are not met, this command will let the oscilloscope
acquire waveforms
Command
:TRIGger:MODE <mode>
:TRIGger:MODE?
Description
Select or query the trigger type.
Parameters
:<mode> ::= < EDGE | PULSe | TV | SLOPe | TIMeout | WINdow | PATTern |
INTerval | UNDerthrow | UART | LIN | CAN | SPI | IIC>
Return
Return EDGE, PULSe, TV, SLOPe, TIMeout, WINdow, PATTern, INTerval,
UNDerthrow, UART, LIN, CAN, SPI, IIC
Example
:TRIGger:MODE SLOPe /*Set the trigger type to slope trigger*/
:TRIGger:MODE? /*The query returns SLOPe*/
Command
:TRIGger:STATus?
Description
Query the current trigger status.
Return
Return TRIGed, NOTRIG

Hantek DSO2000 Series Specifications

General

Brand	Hantek
Model	DSO2000 Series
Category	Test Equipment
Language	English