Hantek DSO2000 Series Programmer's Manual

SCPI Programmers Manual
51
10.5 MEASure:GATE:ENABle
10.6 MEASure:GATE:AY
10.7 MEASUre:GATE:BY
11. MASK Command Subsystem
Command List
⚫ MASK:EANBle
⚫ MASK:SOURce
⚫ MASK:MDISplay
⚫ MASK:SOOutput
⚫ MASK:OUTPut
⚫ MASK:X
⚫ MASK:Y
⚫ MASK:CREate
Command
:MEASure:GATE:ENABle <bool>
:MEASure:GATE:ENABle?
Description
Set or query the current gate control status
Parameters
:<bool> ::= {{1 | ON} | {0 | OFF}
Return
The query returns ON,OFF
Example
:MEASure:GATE:ENABle ON /*Turn on the gate function*/
:MEASure:GATE:ENABle? /*Query returns ON*/
Command
:MEASure:GATE:AY <value>
:MEASure:GATE:AY?
Description
Set or query the value of cursor A.
Parameters
:<value> ::= 0--400
Return
The query returns an integer.
Example
:MEASure:GATE:AY 100 /*Set the value of cursor A*/
:MEASure:GATE:AY? /*Query returns 100*/
Command
:MEASure:GATE:BY <value>
:MEASure:GATE:BY?
Description
Set or query the value of cursor B.
Parameters
:<value> ::= 0--400
Return
The query returns an integer.
Example
:MEASure:GATE:BY 100 /*Set the value of cursor B*/
:MEASure:GATE:BY? /*Query returns 100*/

Hantek DSO2000 Series Specifications

General

Brand	Hantek
Model	DSO2000 Series
Category	Test Equipment
Language	English