Hantek DSO2000 Series Programmer's Manual

SCPI Programmers Manual
45
⚫ CURSor:TRACk:SOURcea
⚫ CURSor:TRACk:SOURceb
⚫ CURSor:TRACk:AX
⚫ CURSor:TRACk:AXValue?
⚫ CURSor:TRACk:AY?
⚫ CURSor:TRACk:AYValue?
⚫ CURSor:TRACk:BX
⚫ CURSor:TRACk:BXValue?
⚫ CURSor:TRACk:BY?
⚫ CURSor:TRACk:BYValue?
9.1 CURSor:MODE
9.2 CURSor:MANual:TYPE
9.3 CURSor:MANual:SOURce
Command
:CURSor:MODE <type>
:CURSor:MODE?
Description
Set or query the cursor measurement mode.
Parameters
:<type> ::= < OFF| MANual| TRACk >
State
MANual: Turn on the manual cursor measurement mode.
TRACk: Turn on the cursor tracking measurement mode.
Return
The query returns OFF, MANual, TRACK
Example
:CURSor:MODE TRACK /*Select TRACK cursor measurement mode*/
:CURSor:MODE? /*The query returns TRACK*/
Command
:CURSor:MANual:TYPE <type>
:CURSor:MANual:TYPE?
Description
Set or query the cursor type for manual cursor measurement.
Parameters
:<type> ::= <X | Y | XY>
State
▷ X: Select X type cursor. The X-shaped cursor is a vertical solid line (Cursor A) and
a vertical dotted line (Cursor B). It is usually used to measure time parameters.
▷ Y: Select the Y cursor. The Y cursor is a horizontal solid line (Cursor A) and a
horizontal dotted line (Cursor B). It is usually used to measure voltage parameters.
▷ XY: Select the XY cursor.
Return
The query returns X, Y, XY.
Example
:CURSor:MANual:TYPE X /*Select X type cursor*/
:CURSor:MANual:TYPE? /*The query returns X*/
Command
:CURSor:MANual:SOURce <source>

Hantek DSO2000 Series Specifications

General

Brand	Hantek
Model	DSO2000 Series
Category	Test Equipment
Language	English