Harman CROWN CDi DriveCore Series User Manual

Page 79
CDi DriveCore Series Operation Manual
Specications
Performance Specifications
Specification
Description
2|300 / 2|300BL 4|300 / 4|300BL 2|600 / 2|600BL 4|600 / 4|600BL
2|1200 /
2|1200BL
4|1200 /
4|1200BL
Digital Signal Processing
96kHz, 32-bit
oating point
96kHz, 32-bit
oating point
96kHz, 32-bit
oating point
96kHz, 32-bit
oating point
96kHz, 32-bit
oating point
96kHz, 32-bit
oating point
Voltage Gain
(at maximum level setting) 4/8Ω,
70Vrms and 100Vrms Operation
34dB 34dB 34dB 34dB 34dB 34dB
Frequency Response
(8Ω, 20Hz - 20kHz)
±0.5dB ±0.5dB ±0.5dB ±0.25dB ±0.25dB ±0.25dB
BLU link Signal-to-Noise Ratio
(ref. rated power, 100V, 20Hz -
20kHz)
>108dB >108dB >108dB >108dB >108dB >108dB
Total Harmonic Distortion (at full
rated power, from 20Hz - 20kHz)
0.35% 0.35% 0.35% 0.35% 0.35% 0.35%
Analog Input Signal to Noise Ratio
(ref. rated power, 100V, 20Hz -
20kHz)
>104dB >104dB >104dB >104dB >104dB >104dB
Intermodulation Distortion
(60Hz and 7kHz at 4:1, from -
30dB to full rated power)
≤0.35% ≤0.35% ≤0.35% ≤0.35% ≤0.35% ≤0.35%
Damping Factor
(20Hz to 100Hz)
>1000 >1000 >1000 >1000 >1000 >1000
Crosstalk
(below rated power, 20Hz to 1kHz)
>80dB >80dB >80dB >80dB >80dB >80dB
Common Mode Rejection
(20Hz to 1kHz, typical)
>70dB >70dB >70dB >70dB >70dB >70dB
DC Output Offset
(with inputs shorted)
±10mV ±10mV ±10mV ±10mV ±10mV ±10mV
Input Impedance (Nominally
balanced, nominally unbalanced)
20 kΩ balanced,
10 kΩ unblanced
20 kΩ balanced,
10 kΩ unblanced
20 kΩ balanced,
10 kΩ unblanced
10 kΩ balanced,
5 kΩ unblanced
10 kΩ balanced,
5 kΩ unblanced
10 kΩ balanced,
5 kΩ unblanced
Maximum Input Level
(Low Amp Gain Mode)
+20dBU +20dBU +20dBU +20dBU +20dBU +20dBU
Required AC Mains (±10%)
100V – 240V~
50/60Hz
100V – 240V~
50/60Hz
100V – 240V~
50/60Hz
100V – 240V~
50/60Hz
100V – 240V~
50/60Hz
100V – 240V~
50/60Hz
Cooling
Continuously variable
speed forced air,
front-to-back airflow
Continuously variable
speed forced air,
front-to-back airflow
Continuously variable
speed forced air,
front-to-back airflow
Continuously variable
speed forced air,
front-to-back airflow
Continuously variable
speed forced air,
front-to-back airflow
Continuously variable
speed forced air,
front-to-back airflow
Power Supply Connector
Standard IEC
type 320 inlet for
detachable connector
100 – 240 V~
Standard IEC
type 320 inlet for
detachable connector
100 – 240 V~
Standard IEC
type 320 inlet for
detachable connector
100 – 240 V~
15A IEC Connector,
100-240V
15A IEC Connector,
100-240V
20A IEC Connector,
100-240V
Load Impedance
Stereo/Dual Mode
2Ω - 16Ω; 70Vrms
and 100Vrms
2Ω - 16Ω; 70Vrms
and 100Vrms
2Ω - 16Ω; 70Vrms
and 100Vrms
2Ω - 16Ω; 70Vrms
and 100Vrms
2Ω - 16Ω; 70Vrms
and 100Vrms
2Ω - 16Ω; 70Vrms
and 100Vrms
Load Impedance
Bridge Mono
4Ω - 16Ω; 140Vrms
and 200Vrms
4Ω - 16Ω; 140Vrms
and 200Vrms
4Ω - 16Ω; 140Vrms
and 200Vrms
4Ω - 16Ω; 140Vrms
and 200Vrms
4Ω - 16Ω; 140Vrms
and 200Vrms
4Ω - 16Ω; 140Vrms
and 200Vrms
Maximum Fan Noise
(re dB SPL @ 1M)
51dBA 51dBA 51dBA 51dBA 54dBA 54dBA
Weight 14.56 lbs (6.6 kg) 16.13 lbs (7.31 kg) 14.56 lbs (6.6 kg) 16.3 lbs (7.39 kg) 17.2 lbs (7.8 kg) 20.1 lbs (9.12 kg)

Harman CROWN CDi DriveCore Series Specifications

General

Brand	Harman
Model	CROWN CDi DriveCore Series
Category	Amplifier
Language	English