HIKVISION DS-2TD2667-35/PY User Manual

Steps
1.
Go to
Conguration > Network > Advanced Conguration > QoS .
2.
Set Video/Audio DSCP, Alarm DSCP and Management DSCP.
Note
Network can identify the priority of data transmission. The bigger the DSCP value is, the
higher the priority is. You need to set the same value in router while
conguration.
3.
Click Save.
10.14.10 Set IEEE 802.1X
You can authenticate user permission of the connected device by setting IEEE 802.1X.
Go to Conguration > Network > Advanced Settings > 802.1X , and enable the function.
Select protocol and version according to router information. User name and password of
server are required.
Note
●
If you set the Protocol to EAP-TLS, select the Client Certicate and CA Certicate.
●
If the function is abnormal, check if the selected
certicate is abnormal in Certicate
Management.
10.15 User and Account
10.15.1 Set User Account and Permission
The administrator can add, modify, or delete other accounts, and grant different
permission to different user levels.
Caution
To increase security of using the device on the network, please change the password of
your account regularly. Changing the password every 3 months is recommended. If the
device is used in high-risk environment, it is recommended that the password should be
changed every month or week.
Steps
1.
Go to Conguration > System > User Management > User Management .
2.
Click Add. Enter User Name, select Level, and enter Password. Assign remote
permission to users based on needs.
Administrator
Thermal & Optical Bi-spectrum Network Camera User Manual
98

HIKVISION DS-2TD2667-35/PY Specifications

General

Brand	HIKVISION
Model	DS-2TD2667-35/PY
Category	Security Camera
Language	English