2.1.2 Activate the Device via SADP
Search and activate the online devices via SADP software.
Before You Start
Access www.hikvision.com to get SADP software to install.
Steps
1.
Connect your computer to the same Wi-Fi network that the device is in.
2.
Run SADP software to search the online devices of the LAN.
3.
Check Device Status from the device list, and select Inactive device.
4.
Create and input the new password in the password
eld, and conrm the password.
Caution
We highly recommend you create a strong password of your own choosing (using a
minimum of 8 characters, including upper case letters, lower case letters, numbers, and
special characters) in order to increase the security of your product. And we recommend
you reset your password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.
5.
Click OK.
Device Status changes into Active.
6.
Optional: Change the network parameters of the device in Modify Network Parameters.
2.2 Login
Log in to the device via Web browser.
2.2.1 Plug-in Installation
Certain operation systems and web browser may restrict the display and operation of the
device function. You should install plug-in or complete certain settings to ensure normal
display and operation. For detailed restricted function, refer to the actual device.
Operating System
Web Browser Operation
Windows Internet Explorer 10+ Follow pop-up prompts to
complete plug-in installation.
Google Chrome 57+
Mozilla Firefox 52+
Microsoft Edge 79.0.309+
Click to
download and install plug-in.
Go to Conguration >
Network > Advanced
Thermal & Optical Bi-spectrum Network Camera User Manual
3
To Next Page
Loading...
Need help?
General
