Clear All Delete all the drawn areas.
Figure 8-1 Set Video Tampering Area
6.
Refer to
Set Arming Schedule
for setting scheduled time. Refer to
Linkage Method
Settings
for setting linkage method.
7.
Click Save.
8.3 Set Alarm Input
Alarm signal from the external device triggers the corresponding actions of the current
device.
Before You Start
Make sure the external alarm device is connected. See
Quick Start Guide
for cable
connection.
Steps
1.
Go to Conguration > Event > Basic Event > Alarm Input .
2.
Check Enable Alarm Input Handling.
3.
Select Alarm Input NO. and Alarm Type from the dropdown list. Edit the Alarm Name.
4.
Refer to
Set Arming Schedule
for setting scheduled time. Refer to
Linkage Method
Settings
for setting linkage method.
5.
Click Copy to... to copy the settings to other alarm input channels.
Thermal & Optical Bi-spectrum Network Camera User Manual
78
To Next Page
Loading...
Need help?
General
