Chapter 4 Live View
It introduces the live view parameters, function icons and transmission parameters
settings.
4.1 Live View Parameters
The supported functions vary depending on the model.
Note
For multichannel devices, select the desired channel rst before live view settings.
4.1.1 Window Division
●
refers to 1 × 1 window division.
●
refers to 2 × 2 window division.
●
refers to 3 × 3 window division.
●
refers to 4 × 4 window division.
4.1.2 Live View Stream Type
Select the live view stream type according to your needs. For the detailed information
about the stream type selection, refer to
Stream Type
.
4.1.3 Enable and Disable Live View
This function is used to quickly enable or disable live view of all channels.
●
Click to start live view of all channels.
●
Click to stop live view of all channels.
Note
Go to Conguration > Local , to set Auto Start Live View, If Yes is selected, live view will
start automatically when you go to live view.
4.1.4 Start Digital Zoom
It helps to see a detailed information of any region in the image.
Steps
1.
Click to enable the digital zoom.
Thermal & Optical Bi-spectrum Network Camera User Manual
22
To Next Page
Loading...
Need help?
General
