2.
Check Enable IP Address Filter.
3.
Select the type of IP address
lter.
Forbidden IP addresses in the list cannot access the device.
Allowed Only IP addresses in the list can access the device.
4.
Edit the IP address lter list.
Add
Add a new IP address or IP address range to the list.
Modify Modify the selected IP address or IP address range in the list.
Delete Delete the selected IP address or IP address range in the list.
5.
Click Save.
10.14.4 Set MAC Address Filter
MAC address lter is a tool for access control. You can enable the MAC address lter to
allow or forbid the visits from the certain MAC addresses.
Steps
Note
MAC Address Filter is mutually exclusive with IP Address Filter.
1.
Go to Conguration > System > Security > MAC Address Filter .
2.
Check Enable MAC Address Filter.
3.
Select the type of MAC address
lter.
Forbidden
MAC addresses in the list cannot access the device.
Allowed Only MAC addresses in the list can access the device.
4.
Edit the MAC address lter list.
Add
Add a new MAC address to the list.
Modify Modify the selected MAC address in the list.
Delete Delete the selected MAC address in the list.
5.
Click Save.
10.14.5
Certicate Management
It helps to manage the server/client certicates and CA certicate, and to send an alarm if
the certicates are close to expiry date, or are expired/abnormal.
Note
The function is only supported by certain device models.
Thermal & Optical Bi-spectrum Network Camera User Manual
94