HIKVISION DS-2TD2667-35/PY User Manual

Note
Please refer to the Quick Start Guide for detailed information of Installation part in the ow
chart.
7.1.2 Automatic Thermography
Congure the temperature measurement parameters and temperature measurement rules.
The device can measure the actual temperature and output alarms when temperature
exceeds the alarm threshold value.
Set Thermography Parameters
Congure the parameters of temperature measurement.
Steps
1.
Go to Conguration > Local , enable Display Temperature Info.
Display Temperature Info.
Select Yes to display temperature information on live view.
Enable Rules to display the rules information on live view.
2.
Click Save.
3.
Go to
Conguration > Temperature Measurement & Fire Prevention > Basic Settings to
congure parameters.
Enable Temperature Measurement
Check to enable temperature measurement function.
Enable Color-Temperature
Check to display Temperature-Color Ruler in live view.
Display Temperature Info. on Stream
Check to display temperature information on the stream.
Display Temperature in Optical Channel
Check to display thermal channel temperature information in the optical channel.
Display Max./Min./Average Temperature
Check to display maximum/minimum/average temperature information on liveview
when the temperature measurement rule is line or area.
Rule Name
Display the rule name rather than the rule ID on the live view. You can set the name in
expert temperature measurement mode for the rule.
Position of Thermometry Info
Thermal & Optical Bi-spectrum Network Camera User Manual
53

HIKVISION DS-2TD2667-35/PY Specifications

General

Brand	HIKVISION
Model	DS-2TD2667-35/PY
Category	Security Camera
Language	English