5.
Input the verication code of your camera.
Note
●
The required verication code is the code you create or change when you enable Hik-
Connect service on the camera.
●
If you forget the
verication code, you can check the current verication code on
Platform Access conguration page via web browser.
6.
Tap Connect to a Network button in the popup interface.
7.
Choose Wired Connection or Wireless Connection according to your camera function.
Wireless
Connection
Input the Wi-Fi password that your mobile phone has connected to,
and tap Next to start the Wi-Fi connection process. (Locate the
camera within 3 meters from the router when setting up the Wi-Fi.)
Wired
Connection
Connect the camera to the router with a network cable and tap
Connected in the result interface.
Note
The router should be the same one which your mobile phone has connected to.
8.
Tap Add in the next interface to nish adding.
For detailed information, refer to the user manual of the Hik-Connect app.
Thermal & Optical Bi-spectrum Network Camera User Manual
21
To Next Page
Need help?
General
